Grassroots Fabric Pots

Grassroots 3x3 Fabric Planter Bed

container explicit recommendation 1 mentions

Use case: Permanent no-till living soil bed in Quadrant 2

Specs: 1.5 ft deep, 3 ft x 3 ft footprint, Foldable fabric construction, Holds about 11 cubic feet of soil

Model: 3x3 Living Soil Bed

Supplier: Grassroots Fabric Pots

• Ep 001: Jeremy unfolds the 3x3 Grassroots bed and calls it the end goal of no-till for growers who can commit that much non-movable soil to one place.

Mentioned in: ep 001

Grassroots 100 Gallon Fabric Pot

container explicit recommendation 1 mentions

Use case: Mixing vessel for 70 gallons of living soil. Walls hold the mix upright once material is in it; breathes while the soil cooks; big enough to comfortably hand-mix 70 gallons.

Specs: 100 gallon capacity, Fabric pot — breathable

Model: 100 Gallon

• Ep 003: Jeremy uses the Grassroots 100-gallon as the entire mixing container for the episode and also as the on-going storage vessel while the soil cooks for 6 days.

Mentioned in: ep 003

Grassroots Fabric Pots 3x3 Living Soil Bed

container implicit use 1 mentions

Use case: Main 3x3 living-soil bed in quadrant 2 of the 10x10 tent, will hold four cannabis females

Specs: compatible with the Grassroots trellis kit cut sheet, fabric raised bed, sized slightly under 36 inches to fit a 3x3 tent, strong bags — won't rip when you muscle PVC legs in

Model: 3x3 bed

Supplier: Grassroots Fabric Pots

• Ep 006: Jeremy matches it with a second 3x3 Grassroots pot on the workbench so he can measure against something empty. He points out these are strong bags that won't rip even when forcing the PVC legs into already-filled soil.

Mentioned in: ep 006

Grassroots Trellis Kit

tool explicit recommendation 1 mentions

Use case: Square up the 3x3 bed and provide an anchor frame for a future scrog screen

Specs: cut lengths account for the extra length added by the 4-way corners, four 4-way corner fittings, four PVC crossbars — 30.5 inches each, four PVC legs — 16.75 inches each, optional 3-way corner available but 4-way preferred

Model: 3x3 trellis kit (4-way corner)

Supplier: Grassroots Fabric Pots

• Ep 006: Jeremy printed the cut sheet that comes with the kit, measures and cuts to the printed lengths, and explains why the 4-way version is preferred over a 3-way (leaves a vertical hole for the scrog screen).

Mentioned in: ep 006