Pulse

Pulse One grow room monitor

sensor explicit recommendation 1 mentions

Use case: Environmental monitor (no control) for tents that just need alerting

Specs: BuildASoil has carried the Pulse One 'for a long time', Wi-Fi (2.4GHz), monitors temperature, humidity and VPD, sends email/text alerts when readings move out of set range

Model: Pulse One

Supplier: pulsegrow.com

• Ep 019: Jeremy mentions the Pulse One as the cheaper alternative to the Pulse Pro for growers who don't need CO2 and PAR monitoring

Mentioned in: ep 019

Pulse Pro grow room monitor

sensor explicit recommendation 1 mentions

Use case: All-in-one monitor for temperature, humidity, VPD, CO2 and PAR in the grow tent

Specs: Pulse has a blog with a VPD calculator and VPD chart maker, Wi-Fi, hangs in the canopy at leaf height on a carabiner, adds CO2 monitoring on top of Pulse One capabilities, adds PAR monitoring (standalone Apogee PAR meter is $538), app-based, sends email/text alerts (does not control anything)

Model: Pulse Pro

Supplier: pulsegrow.com

• Ep 019: Pulse sent Jeremy a unit; he was initially sceptical about the price but on reflection says it justifies the cost if you don't already own standalone CO2 and PAR meters. He'll compare its PAR reading against his Apogee in the next episode.

Mentioned in: ep 019

Pulse VPD calculator and chart maker

software explicit recommendation 1 mentions

Use case: Calculating a target VPD and generating a VPD chart for your specific setup

Specs: VPD calculator and VPD chart maker, free web tool

Supplier: pulsegrow.com

• Ep 019: Jeremy recommends Pulse's website as a free VPD learning resource: 'you can get a free VPD calculator, VPD chart maker, all sorts of stuff over there'

Mentioned in: ep 019

Pulse Pro monitor

sensor explicit recommendation 1 mentions

Use case: Grow room environmental monitor with PAR and CO2 for the 10x10

Specs: alert notifications, built-in CO2 meter, built-in PAR meter with snapshot button, hangs in the tent, price point around $500

Model: Pulse Pro

Supplier: Pulse

• Ep 022: Pulse gave this unit to Jeremy. BuildASoil was not selling it until they tested it. Jeremy compared its PAR reading of 430 to 440 to his expensive PAR meter's 470 reading, and confirmed temperature and humidity matched the Niwa at 80F and 50% RH (about 1.8 VPD

Mentioned in: ep 022

Pulse One monitor

sensor explicit recommendation 1 mentions

Use case: Existing grow room monitor Jeremy has offered for a while

Specs: alert notifications, monitor only — no built-in PAR or CO2, real-time graph, temperature and humidity

Model: Pulse One

Supplier: BuildASoil

• Ep 022: Jeremy says BuildASoil has offered the Pulse One for a while and still sells a lot of them, and that it was already trusted in previous environmental episodes

Mentioned in: ep 022

Pulse VPD calculator spreadsheet

software explicit recommendation 1 mentions

Use case: Dialing in grow room VPD settings

Specs: free spreadsheets, uses a laser leaf temperature reading

Supplier: Pulse

• Ep 022: Jeremy mentioned in his previous environmental episode that Pulse has a free VPD calculator spreadsheet where you can use a laser to read your leaf temperature and set the settings

Mentioned in: ep 022

Pulse environment monitor

sensor implicit use 1 mentions

Use case: Environmental sensor that emails Jeremy when something goes wrong — such as forgetting to plug equipment back in after a video

Specs: email alerts when environment goes out of range

• Ep 024: Jeremy says the Pulse will email him and the knee was starts going off (transcript artifact) if he forgets to plug equipment back in, which is part of why he now leaves everything on during filming.

Mentioned in: ep 024

Pulse Pro

sensor comparison 1 mentions

Use case: Environment monitoring including PAR

Specs: built-in par meter, phone app with snapshot feature

Model: Pulse Pro

• Ep 030: Jeremy corrects himself — the sensor is called the Pulse Pro, not the par meter — and says he'll snapshot its reading via the app alongside the Apogee.

Mentioned in: ep 030